• home
  • contact
  • sitemap
Slide
Slide
Slide
Slide
Slide

VOICE COMMUNICATIONS

  • VHF and UHF based Simplex/Duplex Communications
  • Spares requirements like Battery,Charger,Antenna etc for Existing Wireless Equipments
  • Integration of Existing VHF/UHF wireless devices into IP networks for extension voices networks
  • Wireless Based Attendance Calling Systems

NETWORKING - LAN and WAN

  • Supply and Installation of
  • Structured cablings in Copper and Fiber
  • Switches ,Routers, LAN Extenders,etc
  • Media Convertors for conversions like V.35,G703,Fiber,Ethernet,etc
  • Wi-Fi Access for Campus and Metro users
  • Wireless based LAN and WAN networks
  • Unified Threat Management Solutions for Secured Restricted LAN /WAN Access

Vhf and Uhf communication

Very high frequency (VHF) is the ITU-designated range of radio frequency electromagnetic waves from 30 MHz to 300 MHz. Frequencies immediately below VHF are denoted high frequency (HF), and the next higher frequencies are known as ultra high frequency (UHF).

VHF/UHF transmitters and receivers must be located in an environment as free as possible from sources of electrical noise.

  • Very High Frequency or VHF radios operate in the frequency range of 30MHz to 300MHz.
  • Ultra High Frequency or UHF radios operate in the frequency range of 300Mhz to 3Ghz.

VHF and UHF radios are widely used by public service agencies for two-way radio communication. Modern VHF and UHF radios support both analogue and digital transmission methods.

Rf point to point and point to multi point

In telecommunications, a point-to-point connection refers to a communications connection between two nodes or endpoints. An example is a telephone call, in which one telephone is connected with one other, and what is said by one caller can only be heard by the other. This is contrasted with a point-to-multipoint or broadcast communication topology, in which many nodes can receive information transmitted by one node. Other examples of point-to-point communications links are leased lines, microwave relay links, and two way radio. Examples of point-to-multipoint communications systems are radio and television broadcasting.

Wi-Fi

Wi-Fi is the name of a popular wireless networking technology that uses radio waves to provide wireless high-speed Internet and network connections. Wi-Fi works with no physical wired connection between sender and receiver by using radio frequency (RF) technology, a frequency within the electromagnetic spectrum associated with radio wave propagation. Wi-Fi is supported by many applications and devices including video game consoles, home networks, PDAs, mobile phones, major operating systems, and other types of consumer electronics.

Networking with firewalls, switches

A network firewall protects a computer network from unauthorized access. Network firewalls may be hardware devices, software programs, or a combination of the two.

Network firewalls guard an internal computer network (home, school, business intranet) against malicious access from the outside. Network firewalls may also be configured to limit access to the outside from internal users.

Another common form of network firewall is a proxy server. Proxy servers act as an intermediary between internal computers and external networks by receiving and selectively blocking data packets at the network boundary.

A network switch is a computer networking device that links network segments or network devices. The term commonly refers to a multi-port network bridge that processes and routes data at the data link layer (layer 2) of the OSI model. Switches that additionally process data at the network layer (layer 3) and above are often called layer-3 switches or multilayer switches.

A switch is a telecommunication device which receives a message from any device connected to it and then transmits the message only to the device for which the message was meant. This makes the switch a more intelligent device than a hub.

Video surveillance

Video surveillance systems monitor activity in public areas, businesses or commercial buildings for real-time or later review. Some video surveillance systems include sound while others record video only. Video surveillance systems can also be used inside and outside schools and private residences as an extra measure of security. There are a myriad of different systems with varying levels of sophistication within a wide price range.

Video surveillance systems are increasingly being used in security systems and with good reason. Even the presence of video cameras acts as a deterrent to potential criminals. Possible dangers are also detected at any early stage. Appropriate and rapid intervention will enable damage at least to be contained. Given the ever-growing sources of danger and increasing losses, video surveillance is an extremely valuable and economical means of improving the security of people, buildings and valuables.

Fire alarm

An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke.

Some Fire Alarm Systems utilize Emergency Voice Alarm Communication Systems (EVACS) to provide pre-recorded and manual voice messaging to building occupants. Voice Alarm systems are typically used in high-rise buildings, arenas and other large "defend-in-place" occupancies such as Hospitals and Detention facilities where total evacuation is difficult to achieve.

Mobile jammers

A mobile phone jammer is an instrument used to prevent cellular phones from receiving signals from base stations. When used, the jammer effectively disables cellular phones. These devices can be used in practically any location, but are found primarily in places where a phone call would be particularly disruptive because silence is expected.

As with other radio jamming, cell phone jammers block cell phone use by sending out radio waves along the same frequencies that cellular phones use. This causes enough interference with the communication between cell phones and towers to render the phones unusable. On most retail phones, the network would simply appear out of range. Most cell phones use different bands to send and receive communications from towers (called frequency division duplexing, FDD). Jammers can work by either disrupting phone to tower frequencies or tower to phone frequencies.

Metal detectors

A metal detector is a device which responds to metal that may not be readily apparent.

The simplest form of a metal detector consists of an oscillator producing an alternating current that passes through a coil producing an alternating magnetic field. If a piece of electrically conductive metal is close to the coil, eddy currents will be induced in the metal, and this produces an alternating electric field of its own. If another coil is used to measure the electric field (acting as a magnetometer), the change in the magnetic field due to the metallic object can be detected.

Industrial metal detectors are used in the pharmaceutical, food, beverage, textile, garment, plastics, chemicals, lumber, and packaging industries.

Contamination of food by metal shards from broken processing machinery during the manufacturing process is a major safety issue in the food industry. Metal detectors for this purpose are widely used and integrated into the production line.

Epabx

A business telephone system is any of a range of a multiline telephone systems typically used in business environments, encompassing systems ranging from small key systems to large scale private branch. A business telephone system differs from simply using a telephone with multiple lines in that the lines used are accessible from multiple telephones, or "stations" in the system, and that such a system often provides additional features related to call handling. Business telephone systems are often broadly classified into "key systems", "hybrid systems", and "private branch exchanges".

Plc and scada

A Programmable Logic Controller, PLC or Programmable Controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or non-volatile memory.

SCADA (supervisory control and data acquisition) is a type of industrial control system (ICS). Industrial control systems are computer controlled systems that monitor and control industrial processes that exist in the physical world. SCADA systems historically distinguish themselves from other ICS systems by being large scale processes that can include multiple sites, and large distances.

Automation

Automation is the use of machines, control systems and information technologies to optimize productivity in the production of goods and delivery of services. The correct incentive for applying automation is to increase productivity, and/or quality beyond that possible with current human labor levels so as to realize economies of scale, and/or realize predictable quality levels. In the scope of industrialisation, automation is a step beyond mechanisation. Whereas mechanisation provides human operators with machinery to assist them with the muscular requirements of work, automation greatly decreases the need for human sensory and mental requirements while increasing load capacity, speed, and repeatability. Automation plays an increasingly important role in the world economy and in daily experience.

Automation has had a notable impact in a wide range of industries beyond manufacturing (where it began). Once-ubiquitous telephone operators have been replaced largely by automated telephone switchboards and answering machines. Medical processes such as primary screening in electrocardiography or radiography and laboratory analysis of human genes, sera, cells, and tissues are carried out at much greater speed and accuracy by automated systems.

Vehicle tracking system

A vehicle tracking system combines the installation of an electronic device in a vehicle, or fleet of vehicles, with purpose-designed computer software at least at one operational base to enable the owner or a third party to track the vehicle's location, collecting data in the process from the field and deliver it to the base of operation. Modern vehicle tracking systems commonly use GPS or GLONASS technology for locating the vehicle, but other types of automatic vehicle location technology can also be used. Vehicle information can be viewed on electronic maps via the Internet or specialized software. Urban public transit authorities are an increasingly common user of vehicle tracking systems, particularly in large cities.

Vehicle tracking systems are commonly used by fleet operators for fleet management functions such as fleet tracking, routing, dispatch, on-board information and security.

Contact Info

Head Office - CHENNAI

Postal: No.17/2,MIG Flats, 12th Avenue, Ashoknagar, Chennai - 600 083

Phone: 044 23713999

TeleFax: 044 23713999

Mobile: 9842218893 / 9842218835 / 9842218823

Email: info@inttech.in

Website: www.inttech.in

II Coimbatore II Madurai II

Keywords for SEO

Digital - WAN - LAN - Wifi - Network - communication - video survilence - VHF - UHF - Wireless voicecommunication - Point to Point - Point to Multi point - SDMA - Program - PLC - SCADA Application - CCTV - Storage media